Home >> Tungsten Alloy for Welding >>Tungsten Alloy Rod with Moly

Tungsten Alloy Rod with Moly Introduction:

Tungsten alloy rod with moly is a high density, tungsten-based material produced by powder metallurgy techniques. Tungsten alloy rod with moly is similar to for one type of famous brand rod for welding, which has three kinds applications:
Including:

Tungsten alloy rod with Moly Extrusion Dies

Tungsten alloy rod with Moly Die Casting Components

Tungsten alloy rod with Moly Hot Riveting, Electrical Upsetting and Electroforging

Tungsten Alloy Rod with Moly Used in Extrusion Dies

Tungsten alloy rod with Moly is widely used for dies in the extrusion of metals, especially copper-based alloys which can provide significantly longer life than the more traditional die materials.?Tungsten alloy rod with Moly for welding is a particularly useful material for die casting tooling, especially for casting aluminum and brass. Specific applications such as those shown below enable the economic advantages of tungsten alloy rod with Moly for welding:
a) Dies, cores and ancillary components for brass or ferrous die casting where long life is required.
b) Dies and cores for brass or ferrous die casting where good casting surfaces are a requirement in order to reduce subsequent finishing costs.
c) Cores and die inserts for aluminum die casting which would solder or erode when made from steel.
d) Cores and die inserts located atheavy sections of a casting where extra cooling effect is required to reduce or eliminate shrinkage porosity.
e) Facings applied by TIG welding on critical areas of steel dies subject to erosion when used for aluminum die casting.
f) Good machinability, which facilitates the manufacture of complex shapes and die-recycling of tungsten alloy rod with Moly.

We can provide all kinds of tungsten alloy rod for welding similar to one type of famous brand rod according to your requirement. Our tungsten alloy rod has the similar or even better properties.

Tungsten Alloy Rod with Moly Used in Hot Riveting, Electrical Upsetting and Electroforming

Tungsten alloy rod with Moly is a particularly useful material from which to manufacture diecasting tooling, especially for casting aluminium and brass.
In these processes, heat is generated through the contact resistance of a die/electrode and by the passage of current through the component. Sufficient heat is generated to elevate the material to a plastic condition and pressure being applied to forge or displace the material into some predetermined shape or form.
a) High strength in compression
b) High hardness at elevated temperature
c) Low electrical and thermal conductivity
d) Good resistance to oxidation at elevated temperature
e) Resistance to sticking to work being formed is ideal for this application, and will give long life when the component surfaces are smooth and regular. If the tungsten alloy rod with Moly component materials have a rough and irregular surface, sticking can occur between electrode and upset position of the components.

Typical Properties of Tungsten Alloy Rod with Moly

Density:	17.3 gm/cm3
Hardness:	32 HRC
Ultimate Tensile Strength:	960MN/m2
0.2% Proof Stress:	600MN/m2
Elongation on 24mm:	6%

If you want to know more details about tungsten alloy rod with Moly, please feel free to contact us by email: sales@chinatungsten.com or by phone: 0086 592 5129696.